Kawasaki ABS Module Repair Specialist

Like all problems, they have a solution. At Nito Motor we repair your Kawasaki ABS module, within 24 to 48 hours, from the receipt of the module itself at our facilities. 

 

Advantages of repairing your Kawasaki ABS module

Like any repair, it depends on the damage it has. At Nito Motor, we do a complete restoration of the ABS module. It does not matter in the condition it is in.

We have a professional and qualified team to repair common and unusual faults that the ABS module may present.

The price of the repair is much cheaper than if you had to buy a new ABS module.

KAWASAKI motorcycle ABS devices

repair-abs-module-motorcycle-suzuki
ABS modulator
Nissin
repair-abs-module-kawasaki-suzuki-nissin
ABS modulator
Nissin
repair-control units-abs-suzuki
Other devices
unidentified

Common mistakes in KAWASAKI ABS brakes

The Kawasaki ABS module tends to fail in different ways. Climatic or environmental wear and tear deteriorate it little by little, and at the same time wear and tear during use, due to traction and magnetization that is lost over time. 

The repair time under normal conditions is 24 to 48 hours, after that time it is already repaired. Once the ABS module is installed on the bike, the customer would have their brakes back, repaired and ready to use.

One of the most common errors in the brakes are the lack of grip or fraction that they have, since constant use reduces the grip of the same.

How we work

CONTRACT THE REPAIR OF YOUR ABS MODULE

Hire the repair service listed below. We review both the mechanical and electronic parts, restoring all the parts in poor condition with new ones.
12-month warranty on the repair of the ABS device without limit of km.

COMPLETE THE REQUESTED FIELDS

Download the receipt document that you will receive at the email address provided in the hiring process. Make the secure payment. If the repair cannot be carried out, the amount paid will be returned in full, with a single charge of € 35 + VAT per diagnosis.

WE RECEIVED THE REPAIR ORDER

We receive the repair order, and you receive a confirmation of the repair request. In 24 hours, the Nacex transport agency will remove the ABS module, with prior notice to the client, at the requested address. Fill in the data correctly.

PACKAGING

Prepare your ABS module, as indicated later. Remember to drain the brake fluid from the module. Indicate the following address on the package Calle Deleitosa nº8, 06800, Mérida (Badajoz) and insert the requested receipt document in the box.

WE PICK IT UP

We receive the ABS device at our facilities. We identify the errors indicated by you or your mechanic in the requested document. We carry out the initial diagnosis, corroborating the errors in the test bench.

WE REPAIR

We repair the device in 24/48 hours under normal conditions.
We carry out the final test to check the optimal functioning of the ABS. We send the ABS module to the indicated address and enjoy the bike!

The prices stated in the repair are standard for all ABS, Kawasaki devices.

Nito Motor guarantees all its repairs to Suzuki ABS modules, for 12 months from the issuance of the invoice. Solely and exclusively the repair, not being responsible for the shipping and return postage, or any other service contracted outside of Nito Motor.

To make the guarantee effective, if necessary, it is essential to present the purchase invoice and a diagnosis of the device showing the faults. 

Drain all the brake fluid from the ABS module. We recommend that all holes be covered (with paper) so that no dirt, or excess brake fluid, enters internal parts that can further damage the ABS modulator. Put the ABS modulator in a box, protect it well. IMPORTANT: They only have to send the ABS modulator. Remove the accessories from the device (bracket, hoses, etc ...) if there is a leak, Nito Motor is not responsible.

ABS modules that have been previously manipulated (disassembled) for their repair attempt or out of simple curiosity have a supplement of € 50 plus VAT, (It must be indicated in the modulator reception document), in the case of receiving it in perfect condition if the above is met, we reserve the right not to apply this supplement. In this case we will contact you.

Kawasaki motorcycle ABS device

423,50

What does the ABS Device repair include?

  • Initial diagnosis of the device in our facilities.
  • Complete restoration of ABS Modulator, KAWASAKI
  • Replacement of parts and components in poor condition.
  • Final diagnosis on the test bench and verification of the device's operation.
  • 12 months certified warranty on repair.
  • Standard repair price for all KAWASAKI devices

Send your unit, along with the error codes presented by your motorcycle. Once received at our facilities, the technicians will diagnose the failure and proceed to repair it.

Your module or ABS control unit repaired within 24-48 hours, for repairs of the most common models, from their reception in our facilities.

Download shipping document

Add mounting and dismounting insurance

Hire your ABS module installation insurance. We guarantee assembly and disassembly for one year in the workshop where you hire the service.

Product price
Total additional options:
Order Total:

Description

Still in doubt about the repair of your ABS device? Contract ABS module repair, KAWASAKI.

Nito Motor praises us for the experience and satisfaction of our customers. We are a specialist in motorcycle ABS module repairs. We work with more than 190 professional workshops located in Spain, Italy and Portugal. We provide services to both individuals and professionals. You only have to contract the repair through our website. If the repair cannot be carried out, (1-100) your money back.

If you don't have a trustworthy workshop, ask us.

Are You professional? Register in the PROFESSIONALS section. You will be part of a network of collaborating workshops.

We repair the following brands;

  • BMW
  • KAWASAKI
  • DUCATI
  • HARLEY DAVIDSON
  • KTM
  • YAMAHA
  • SUZUKI
  • HONDA

12-month warranty on the repair of your device, unlimited kilometers!

Steps to follow:

  1. Disassemble the ABS device in a specialized workshop (If necessary, contact us)
  2. Print the error codes that your ABS presents and fill in the following document Download shipping document
  3. Contract the repair of your ABS device.
  4. Empty, dry and pack your ABS modules. The maximum dimensions of the package allowed are 50x50x50cm
  5. We request the collection. The transport company may contact you to organize it.
  6. We receive the ABS module at our facilities.
  7. We carry out the initial diagnosis identifying and corroborating the faults provided by the workshop or customer.
  8. We restore the modulator.
  9. We carry out functional tests on our test bench.
  10. We ship back to the customer

 

Other Information

Weight 5 kg
Sizes 50x50x50 cm

ratings

Not yet reviewed

Only registered users who have purchased this product may make a review.

Shopping Cart
Go up